Aqaba Flagpole
Information
Technical data
Pole height: 130 meters (427 feet)
Pole weight: 344,000 pounds (156 tonnes)
Number of pole sections: 11
Bottom of pole diameter: 103 inches (2.6 metres)
Top of pole diameter: 42 inches (1.1 metres)
Bottom section plate thickness: 1.26 inches – Fy = 50 ksi
Top section plate thickness: .394 inches – Fy = 36 ksi
Maximum section length: 39 feet (12 m)
Mating flanges thicknesses: Minimum: 1.58 inches, maximum 1.97 inches (50 mm)
Flange bolts maximum diameter: 3 inches
Bolt material: A354, Fy = 115 ksi
Foundation: 56 feet (17 m) square by 8.50 feet (2.59 m) deep, 990 cubic yards concrete
Design criteria
Flag size: 98.5 feet (30.0 m) by 197 feet (60 m)
Flag material: Polyester
Wind speed criteria: (pole and flag) - 90 mph (140 km/h)
Wind speed criteria: (pole only) - 130 mph (210 km/h)
Seismic zone: 4 (Uniform Building Code)
Near seismic source: Less than 2 km (Aqaba Rift)
Codes
ANSI/NAAMFP-1001-97 – Guide Specification for Design Loads of Metal Flagpoles
Structural engineer of record: Neil Moore and Associates
Builder: Trident Support Corp. with assistance from US Flag and Flagpole Supply LP Contractor : Sahara contracting corporation, Amman, Jordan
References
- ^ - Aqaba Flagpole info on the website of Trident Support Corp. Archived January 27, 2011, at the Wayback Machine
- ^ "Dubai wants tallest flagpole". Archived from the original on 2010-02-06. Retrieved 2009-11-12. Archived February 6, 2010, at the Wayback Machine
- ^ "جلالته يفتتح بوابة العقبة ويشاهد رفع علم الثورة العربية ويتفقد مشروع فندق انتركونتيننتال - صحيفة الرأي". www.alrai.com.
29°31′18″N 35°00′04″E / 29.5217°N 35.0011°E