Bridge No. 1132
Description and history
Bridge No. 1132 is located in western Killingworth and eastern Madison, spanning the Hammonasset River south of Lake Hammonasset. The bridge spans a steep wooded ravine, with its main arch spanning 100 feet (30 m). There are three concrete girder spans on each side of the main arch, giving the structure an overall length of 231 feet (70 m). The road deck is 30 feet (9.1 m) wide, but the arches supporting it are only 20 feet (6.1 m) apart, with concrete ribs projecting to the sides of the arches for additional support. There are eight supporting concrete beams rising in each spandrel area of the arches.
The bridge was designed by the Connecticut Highway Department and built by the Osborn-Barnes Construction Company of Danbury, Connecticut, in 1934. It was highlighted by the Highway Department for its scenic location. The state typically only built open-spandrel bridges for particularly long spans, or sites such as this one with steep sides. This bridge replaced an older one that had been located further down the ravine; its construction thus eliminated steep approaches on what is a major east-west roadway.
See also
- National Register of Historic Places listings in Middlesex County, Connecticut
- National Register of Historic Places listings in New Haven County, Connecticut
- List of bridges documented by the Historic American Engineering Record in Connecticut
- List of bridges on the National Register of Historic Places in Connecticut
References
- ^ "National Register Information System". National Register of Historic Places. National Park Service. March 13, 2009.
- ^ Bruce Clouette (March 31, 2003). "NRHP Inventory-Nomination: Bridge No. 1132". National Park Service. and Accompanying six photos, from 2003 (see photo captions page 11 of text document)
External links
- Historic American Engineering Record (HAER) No. CT-162, "Bridge No. 1132, Route 80, spanning Hammonasset River, Madison, New Haven County, CT", 17 photos, 9 data pages, 3 photo caption pages