File:SAS 2.gif
SAS-B was launched from the San Marco platform off the coast of Kenya, Africa, into a nearly equatorial orbit. The orbiting spacecraft was in the shape of a cylinder approximately 59 cm in diameter and 135 cm in length. Four solar paddles were used to recharge the 6 amp-h nickel-cadmium battery and provide power to the spacecraft and telescope experiment. The spacecraft was spin stabilized, and a magnetically torqued commandable control system was used to point the spin axis of the spacecraft to any position in space within approximately 1 degree. The experiment axis lay along this axis allowing the telescope to look at any selected region of the sky with its plus or minus 30 degree acceptance aperture. The nominal spin rate was 1/12 rpm. Data were taken at 1000 bps and could be recorded on an onboard tape recorder and simultaneously transmitted in real time. The recorded data were transmitted once per orbit. This required approximately 5 minutes.
The telescope experiment was initially turned on November 20, 1972, and by November 27, 1972, the spacecraft became fully operational. The low-voltage power supply for the experiment failed on June 8, 1973. No useful scientific data were obtained after that date. With the exception of a slightly degraded star sensor, the spacecraft control section performed in an excellent manner.
Licensing
|
This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.) |  |
 |
Warnings:
|
