File:San Francisco Oakland Bay Bridge Retrofit 3.jpg
These are hot riveted, which results in a relatively soft join which may fail under extreme stress. In the western span most of these have been removed and replaced with high strength bolts. In addition the lattice angle iron pieces have been replaced with steel plate.
To the left of the image the more distant steel en:eyebar rods without lacing are resisting only tension; they are the major tensile elements of one of the two en:cantilever structures.
Above, the deep beams support the upper deck. When the bridge was converted to five lanes in each direction these beams were strengthened to support the additional weight of trucks. A small portion of the lower chord reenforcement may be seen at the bottom of the two beams in the image.
31 July 2004 (original upload date)
(Reusing this file)
-
Detail of en:San Francisco-Oakland Bay Bridge showing seismic retrofit elements
-
Bolted plate of the San Francisco-Oakland Bay Bridge.
-
Cropped version of bolted plate of the San Francisco-Oakland Bay Bridge.
-
Composite of cropped images