Iron Trichloride : Soft.lk - A Premium Software Developers - Meet one of the most powerful and intuitive POS systems for retail in Sri Lanka

Iron(III) chloride describes the inorganic compounds with the formula Fe Cl₃(H₂O)_x. Also called ferric chloride, these compounds are some of the most important and commonplace compounds of iron. They are available both in anhydrous and in hydrated forms, which are both hygroscopic. They feature iron in its +3 oxidation state. The anhydrous derivative is a Lewis acid, while all forms are mild oxidizing agents. It is used as a water cleaner and as an etchant for metals.

Electronic and optical properties

Anhydrous iron(III) chloride evaporates at relatively low temperatures to give the bitetrahedral dimer.

All forms of ferric chloride are paramagnetic, owing to the presence of unpaired electrons residing in 3d orbitals. Although Fe(III) chloride can be octahedral or tetrahedral (or both, see structure section), all of these forms have five unpaired electrons, one per d-orbital. The high spin d electronic configuration requires that d-d electronic transitions are spin forbidden, in addition to violating the Laporte rule. This double forbidden-ness results in its solutions being only pale colored. Or, stated more technically, the optical transitions are non-intense. Aqueous ferric sulfate and ferric nitrate, which contain [Fe(H₂O)₆], are nearly colorless, whereas the chloride solutions are yellow. Thus, the chloride ligands significantly influence the optical properties of the iron center.

Structure

Iron(III) chloride can exist as an anhydrous material and a series of hydrates, which results in distinct structures.

Anhydrous

The anhydrous compound is a hygroscopic crystalline solid with a melting point of 307.6 °C. The colour depends on the viewing angle: by reflected light, the crystals appear dark green, but by transmitted light, they appear purple-red. Anhydrous iron(III) chloride has the BiI₃ structure, with octahedral Fe(III) centres interconnected by two-coordinate chloride ligands.

Iron(III) chloride has a relatively low melting point and boils at around 315 °C. The vapor consists of the dimer Fe₂Cl₆, much like aluminium chloride. This dimer dissociates into the monomeric FeCl₃ (with D_3h point group molecular symmetry) at higher temperatures, in competition with its reversible decomposition to give iron(II) chloride and chlorine gas.

Hydrates

Ferric chloride form hydrates upon exposure to water, reflecting its Lewis acidity. All hydrates exhibit deliquescence, meaning that they become liquid by absorbing moisture from the air. Hydration invariably gives derivatives of aquo complexes with the formula [FeCl₂(H₂O)₄]. This cation can adopt either trans or cis stereochemistry, reflecting the relative location of the chloride ligands on the octahedral Fe center. Four hydrates have been characterized by X-ray crystallography: the dihydrate FeCl₃·2H₂O, the disesquihydrate FeCl₃·2.5H₂O, the trisesquihydrate FeCl₃·3.5H₂O, and finally the hexahydrate FeCl₃·6H₂O. These species differ with respect to the stereochemistry of the octahedral iron cation, the identity of the anions, and the presence or absence of water of crystallization. The structural formulas are [trans−FeCl₂(H₂O)₄][FeCl₄], [cis−FeCl₂(H₂O)₄][FeCl₄]·H₂O, [cis−FeCl₂(H₂O)₄][FeCl₄]·H₂O, and [trans−FeCl₂(H₂O)₄]Cl·2H₂O. The first three members of this series have the tetrahedral tetrachloroferrate ([FeCl₄]) anion.

Solution

Like the solid hydrates, aqueous solutions of ferric chloride also consist of the octahedral [FeCl₂(H₂O)₄] of unspecified stereochemistry. Detailed speciation of aqueous solutions of ferric chloride is challenging because the individual components do not have distinctive spectroscopic signatures. Iron(III) complexes, with a high spin d configuration, is kinetically labile, which means that ligands rapidly dissociate and reassociate. A further complication is that these solutions are strongly acidic, as expected for aquo complexes of a tricationic metal. Iron aquo complexes are prone to olation, the formation of polymeric oxo derivatives. Dilute solutions of ferric chloride produce soluble nanoparticles with molecular weight of 10, which exhibit the property of "aging", i.e., the structure change or evolve over the course of days. The polymeric species formed by the hydrolysis of ferric chlorides are key to the use of ferric chloride for water treatment.

In contrast to the complicated behavior of its aqueous solutions, solutions of iron(III) chloride in diethyl ether and tetrahydrofuran are well-behaved. Both ethers form 1:2 adducts of the general formula FeCl₃(ether)₂. In these complexes, the iron is pentacoordinate.

Preparation

Several hundred tons of anhydrous iron(III) chloride are produced annually. The principal method, called direct chlorination, uses scrap iron as a precursor:

2 Fe + 3 Cl₂ → 2 FeCl₃

The reaction is conducted at several hundred degrees such that the product is gaseous. Using excess chlorine guarantees that the intermediate ferrous chloride is converted to the ferric state. A similar but laboratory-scale process also has been described.

Aqueous solutions of iron(III) chloride are also produced industrially from a number of iron precursors, including iron oxides:

Fe₂O₃ + 6 HCl + 9 H₂O → 2 FeCl₃(H₂O)₆

In complementary route, iron metal can be oxidized by hydrochloric acid followed by chlorination:

Fe + 2 HCl → FeCl₂ + H₂

FeCl₂ + 0.5 Cl₂ + 6 H₂O → FeCl₃(H₂O)₆

A number of variables apply to these processes, including the oxidation of iron by ferric chloride and the hydration of intermediates. Hydrates of iron(III) chloride do not readily yield anhydrous ferric chloride. Attempted thermal dehydration yields hydrochloric acid and iron oxychloride. In the laboratory, hydrated iron(III) chloride can be converted to the anhydrous form by treatment with thionyl chloride or trimethylsilyl chloride:

FeCl₃·6H₂O + 12 (CH₃)₃SiCl → FeCl₃ + 6 ((CH₃)₃Si)₂O + 12 HCl

FeCl₃·6H₂O + 6 SOCl₂ → FeCl₃ + 6 SO₂ + 12 HCl

Reactions

Being high spin d electronic configuration iron(III) chlorides are labile, meaning that its Cl- and H₂O ligands exchange rapidly with free chloride and water. In contrast to their kinetic lability, iron(III) chlorides are thermodynamically robust, as reflected by the vigorous methods applied to their synthesis, as described above.

Anhydrous FeCl₃

Aside from lability, which applies to anhydrous and hydrated forms, the reactivity of anhydrous ferric chloride reveals two trends: It is a Lewis acid and an oxidizing agent.

Reactions of anhydrous iron(III) chloride reflect its description as both oxophilic and a hard Lewis acid. Myriad manifestations of the oxophiliicty of iron(III) chloride are available. When heated with iron(III) oxide at 350 °C it reacts to give iron oxychloride:

FeCl₃ + Fe₂O₃ → 3FeOCl

Alkali metal alkoxides react to give the iron(III) alkoxide complexes. These products have more complicated structures than anhydrous iron(III) chloride. In the solid phase a variety of multinuclear complexes have been described for the nominal stoichiometric reaction between FeCl₃ and sodium ethoxide:

FeCl₃ + 3 CH₃CH₂ONa → "Fe(OCH₂CH₃)₃" + 3 NaCl

Iron(III) chloride forms a 1:2 adduct with Lewis bases such as triphenylphosphine oxide; e.g., FeCl₃(OP(C₆H₅)₃)₂. The related 1:2 complex FeCl₃(OEt₂)₂, where Et = C₂H₅), has been crystallized from ether solution.

Iron(III) chloride also reacts with tetraethylammonium chloride to give the yellow salt of the tetrachloroferrate ion ((Et₄N)[FeCl₄]). Similarly, combining FeCl₃ with NaCl and KCl gives Na[FeCl₄] and K[FeCl₄], respectively.

In addition to these simple stoichiometric reactions, the Lewis acidity of ferric chloride enables its use in a variety of acid-catalyzed reactions as described below in the section on organic chemistry.

In terms of its being an oxidant, iron(III) chloride oxidizes iron powder to form iron(II) chloride via a comproportionation reaction:

2 FeCl₃ + Fe → 3 FeCl₂

A traditional synthesis of anhydrous ferrous chloride is the reduction of FeCl₃ with chlorobenzene:

2 FeCl₃ + C₆H₅Cl → 2 FeCl₂ + C₆H₄Cl₂ + HCl

iron(III) chloride releases chlorine gas when heated above 160 °C, generating ferrous chloride:

2FeCl₃ → 2FeCl₂ + Cl₂

To suppress this reaction, the preparation of iron(III) chloride requires an excess of chlorinating agent, as discussed above.

Hydrated FeCl₃

Unlike the anhydrous material, hydrated ferric chloride is not a particularly strong Lewis acid since water ligands have quenched the Lewis acidity by binding to Fe(III).

Like the anhydrous material, hydrated ferric chloride is oxophilic. For example, oxalate salts react rapidly with aqueous iron(III) chloride to give [Fe(C₂O₄)₃], known as ferrioxalate. Other carboxylate sources, e.g., citrate and tartrate, bind as well to give carboxylate complexes. The affinity of iron(III) for oxygen ligands was the basis of qualitative tests for phenols. Although superseded by spectroscopic methods, the ferric chloride test is a traditional colorimetric test. The affinity of iron(III) for phenols is exploited in the Trinder spot test.

Aqueous iron(III) chloride serves as a one-electron oxidant illustrated by its reaction with copper(I) chloride to give copper(II) chloride and iron(II) chloride.

FeCl₃ + CuCl → FeCl₂ + CuCl₂

This fundamental reaction is relevant to the use of ferric chloride solutions in etching copper.

Organometallic chemistry

The interaction of anhydrous iron(III) chloride with organolithium and organomagnesium compounds has been examined often. These studies are enabled because of the solubility of FeCl₃ in ethereal solvents, which avoids the possibility of hydrolysis of the nucleophilic alkylating agents. Such studies may be relevant to the mechanism of FeCl₃-catalyzed cross-coupling reactions. The isolation of organoiron(III) intermediates requires low-temperature reactions, lest the [FeR₄] intermediates degrade. Using methylmagnesium bromide as the alkylation agent, salts of Fe(CH₃)₄] have been isolated. Illustrating the sensitivity of these reactions, methyl lithium LiCH₃ reacts with iron(III) chloride to give lithium tetrachloroferrate(II) Li₂[FeCl₄]:

2 FeCl₃ + LiCH₃ → FeCl₂ + Li[FeCl₄] + 0.5 CH₃CH₃

Li[FeCl₄] + LiCH₃ → Li₂[FeCl₄] + 0.5 CH₃CH₃

To a significant extent, iron(III) acetylacetonate and related beta-diketonate complexes are more widely used than FeCl₃ as ether-soluble sources of ferric ion. These diketonate complexes have the advantages that they do not form hydrates, unlike iron(III) chloride, and they are more soluble in relevant solvents. Cyclopentadienyl magnesium bromide undergoes a complex reaction with iron(III) chloride, resulting in ferrocene:

3 C₅H₅MgBr + FeCl₃ → Fe(C₅H₅)₂ + 1/n (C₅H₅)_n + 3 MgBrCl

This conversion, although not of practical value, was important in the history of organometallic chemistry where ferrocene is emblematic of the field.

Uses

Water treatment

The largest applications of iron(III) chloride are sewage treatment and drinking water production. By forming highly dispersed networks of Fe-O-Fe containing materials, ferric chlorides serve as coagulant and flocculants. In this application, an aqueous solution of FeCl₃ is treated with base to form a floc of iron(III) hydroxide (Fe(OH)₃), also formulated as FeO(OH) (ferrihydrite). This floc facilitates the separation of suspended materials, clarifying the water.

Iron(III) chloride is also used to remove soluble phosphate from wastewater. Iron(III) phosphate is insoluble and thus precipitates as a solid. One potential advantage of its use in water treatment, is that the ferric ion oxidizes (deodorizes) hydrogen sulfide.

Etching and metal cleaning

It is also used as a leaching agent in chloride hydrometallurgy, for example in the production of Si from FeSi (Silgrain process by Elkem).

In another commercial application, a solution of iron(III) chloride is useful for etching copper according to the following equation:

2 FeCl₃ + Cu → 2 FeCl₂ + CuCl₂

The soluble copper(II) chloride is rinsed away, leaving a copper pattern. This chemistry is used in the production of printed circuit boards (PCB).

Iron(III) chloride is used in many other hobbies involving metallic objects.

Organic chemistry

Structure of FeCl₃(diethylether)₂. Color code: Cl=green,Fe = blue, O = red.

In industry, iron(III) chloride is used as a catalyst for the reaction of ethylene with chlorine, forming ethylene dichloride (1,2-dichloroethane):

H₂C=CH₂ + Cl₂ → ClCH₂CH₂Cl

Ethylene dichloride is a commodity chemical, which is mainly used for the industrial production of vinyl chloride, the monomer for making PVC.

Illustrating it use as a Lewis acid, iron(III) chloride catalyses electrophilic aromatic substitution and chlorinations. In this role, its function is similar to that of aluminium chloride. In some cases, mixtures of the two are used.

Organic synthesis research

Although iron(III) chlorides are seldom used in practical organic synthesis, they have received considerable attention as reagents because they are inexpensive, earth abundant, and relatively nontoxic. Many experiments probe both its redox activity and its Lewis acidity. For example, iron(III) chloride oxidizes naphthols to naphthoquinones: 3-Alkylthiophenes are polymerized to polythiophenes upon treatment with ferric chloride. Iron(III) chloride has been shown to promote C-C coupling reaction.

Several reagents have been developed based on supported iron(III) chloride. On silica gel, the anhydrous salt has been applied to certain dehydration and pinacol-type rearrangement reactions. A similar reagent but moistened induces hydrolysis or epimerization reactions. On alumina, ferric chloride has been shown to accelerate ene reactions.

When pretreated with sodium hydride, iron(III) chloride gives a hydride reducing agent that convert alkenes and ketones into alkanes and alcohols, respectively.

Histology

Iron(III) chloride is a component of useful stains, such as Carnoy's solution, a histological fixative with many applications. Also, it is used to prepare Verhoeff's stain.

Natural occurrence

Like many metal halides, FeCl₃ naturally occurs as a trace mineral. The rare mineral molysite is usually associated with volcanoes and fumaroles.

FeCl₃-based aerosol are produced by a reaction between iron-rich dust and hydrochloric acid from sea salt. This iron salt aerosol causes about 1-5% of naturally-occurring oxidization of methane and is thought to have a range of cooling effects; thus, it has been proposed as a catalyst for Atmospheric Methane Removal.

The clouds of Venus are hypothesized to contain approximately 1% FeCl₃ dissolved in sulfuric acid.

Safety

Iron(III) chlorides are widely used in the treatment of drinking water, so they pose few problems as poisons, at low concentrations. Nonetheless, anhydrous iron(III) chloride, as well as concentrated Fe Cl₃ aqueous solution, is highly corrosive, and must be handled using proper protective equipment.

Notes

^ An alternative GHS classification from the Japanese GHS Inter-ministerial Committee (2006) notes the possibility of respiratory tract irritation from FeCl₃ and differs slightly in other respects from the classification used here.

References

^ Haynes WM, ed. (2011). CRC Handbook of Chemistry and Physics (92nd ed.). Boca Raton, FL: CRC Press. p. 4.69. ISBN 1-4398-5511-0.
^ Haynes WM, ed. (2011). CRC Handbook of Chemistry and Physics (92nd ed.). Boca Raton, FL: CRC Press. p. 4.133. ISBN 1-4398-5511-0.
^ NIOSH Pocket Guide to Chemical Hazards. "#0346". National Institute for Occupational Safety and Health (NIOSH).
^ HSNO Chemical Classification Information Database, New Zealand Environmental Risk Management Authority, retrieved 19 Sep 2010
^ Various suppliers, collated by the Baylor College of Dentistry, Texas A&M University. (accessed 2010-09-19)
^ GHS classification – ID 831, Japanese GHS Inter-ministerial Committee, 2006, retrieved 19 Sep 2010
^ Hashimoto S, Forster K, Moss SC (1989). "Structure refinement of an FeCl₃ crystal using a thin plate sample". J. Appl. Crystallogr. 22 (2): 173–180. Bibcode:1989JApCr..22..173H. doi:10.1107/S0021889888013913.
^ Housecroft CE, Sharpe AG (2012). Inorganic Chemistry (4th ed.). Prentice Hall. p. 747. ISBN 978-0-273-74275-3.
^ Simon A. Cotton (2018). "Iron(III) Chloride and Its Coordination Chemistry". Journal of Coordination Chemistry. 71 (21): 3415–3443. doi:10.1080/00958972.2018.1519188. S2CID 105925459.
^ Wildermuth E, Stark H, Friedrich G, Ebenhöch FL, Kühborth B, Silver J, Rituper R (2000). "Iron Compounds". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a14_591. ISBN 3527306730.
^ Holleman AF, Wiberg E (2001). Wiberg N (ed.). Inorganic Chemistry. San Diego: Academic Press. ISBN 978-0-12-352651-9.
^ Lind MD (1967). "Crystal Structure of Ferric Chloride Hexahydrate". The Journal of Chemical Physics. 47 (3): 990–993. Bibcode:1967JChPh..47..990L. doi:10.1063/1.1712067.
^ Flynn CM (1984). "Hydrolysis of Inorganic Iron(III) Salts". Chemical Reviews. 84: 31–41. doi:10.1021/cr00059a003.
^ Spandl J, Kusserow M, Brüdgam I (2003). "Alkoxo-Verbindungen des dreiwertigen Eisen: Synthese und Charakterisierung von [Fe2(Ot Bu)6], [Fe2Cl2(Ot Bu)4], [Fe2Cl4(Ot Bu)2] und [N(n Bu)4]2[Fe6OCl6(OMe)12]". Zeitschrift für anorganische und allgemeine Chemie. 629 (6): 968–974. doi:10.1002/zaac.200300008.
^ Tarr BR, Booth HS, Dolance A (1950). "Anhydrous Iron(III) Chloride (Ferric Chloride)". Inorganic Syntheses. Vol. 3. pp. 191–194. doi:10.1002/9780470132340.ch51. ISBN 9780470131626.
^ H. Lux (1963). "Iron (III) Chloride". In G. Brauer (ed.). Handbook of Preparative Inorganic Chemistry, 2nd Ed. Vol. 2. NY, NY: Academic Press. p. 1492.
^ Pray AR, Heitmiller RF, Strycker S, et al. (1990). "Anhydrous Metal Chlorides". Inorganic Syntheses. Vol. 28. pp. 321–323. doi:10.1002/9780470132593.ch80. ISBN 9780470132593.
^ Boudjouk P, So JH, Ackermann MN, et al. (1992). "Solvated and Unsolvated Anhydrous Metal Chlorides from Metal Chloride Hydrates". Inorganic Syntheses. Vol. 29. pp. 108–111. doi:10.1002/9780470132609.ch26. ISBN 9780470132609.
^ Greenwood NN, Earnshaw A (1997). Chemistry of the Elements (2nd ed.). Oxford: Butterworth-Heinemann. p. 1084. ISBN 9780750633659.
^ White AD, Gallou F (2006). "Iron(III) Chloride". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.ri054.pub2. ISBN 0471936235.
^ Kikkawa S, Kanamaru F, Koizumi M, et al. (1984). "Layered Intercalation Compounds". In Holt SL Jr (ed.). Inorganic Syntheses. Vol. 22. John Wiley & Sons, Inc. pp. 86–89. doi:10.1002/9780470132531.ch17. ISBN 9780470132531.
^ Turova NY, Turevskaya EP, Kessler VG, et al., eds. (2002). "12.22.1 Synthesis". The Chemistry of Metal Alkoxides. Springer Science. p. 481. ISBN 0306476576.
^ Bradley DC, Mehrotra RC, Rothwell I, et al. (2001). "3.2.10. Alkoxides of later 3d metals". Alkoxo and aryloxo derivatives of metals. San Diego: Academic Press. p. 69. ISBN 9780121241407. OCLC 162129468.
^ Cook CM Jr, Dunn WE Jr (1961). "The Reaction of Ferric Chloride with Sodium and Potassium Chlorides". J. Phys. Chem. 65 (9): 1505–1511. doi:10.1021/j100905a008.
^ P. Kovacic and N. O. Brace (1960). "Iron(II) Chloride". Inorganic Syntheses. Vol. 6. pp. 172–173. doi:10.1002/9780470132371.ch54. ISBN 9780470132371.
^ Furniss BS, Hannaford AJ, Smith PW, et al. (1989). Vogel's Textbook of Practical Organic Chemistry (5th ed.). New York: Longman/Wiley. ISBN 9780582462366.
^ James A. King, Alan B. Storrow, Jeff A. Finkelstein (1995). "Urine Trinder Spot Test: A Rapid Salicylate Screen for the Emergency Department". Annals of Emergency Medicine. 26 (3): 330–333. doi:10.1016/S0196-0644(95)70082-X. PMID 7661424.
^ Mako TL, Byers JA (2016). "Recent Advances in Iron-Catalysed Cross Coupling Reactions and Their Mechanistic Underpinning". Inorganic Chemistry Frontiers. 3 (6): 766–790. doi:10.1039/C5QI00295H.
^ Sears JD, Muñoz SB, Cuenca MC, Brennessel WW, Neidig ML (2019). "Synthesis and Characterization of a Sterically Encumbered Homoleptic Tetraalkyliron(III) Ferrate Complex". Polyhedron. 158: 91–96. doi:10.1016/j.poly.2018.10.041. PMC 6481957. PMID 31031511. and references therein.
^ Berthold HJ, Spiegl HJ (1972). "Über die Bildung von Lithiumtetrachloroferrat(II) Li₂FeCl₄ bei der Umsetzung von Eisen(III)-chlorid mit Lithiummethyl (1:1) in ätherischer Lösung". Z. Anorg. Allg. Chem. (in German). 391 (3): 193–202. doi:10.1002/zaac.19723910302.
^ Kealy TJ, Pauson PL (1951). "A New Type of Organo-Iron Compound". Nature. 168 (4285): 1040. Bibcode:1951Natur.168.1039K. doi:10.1038/1681039b0. S2CID 4181383.
^ Pauson PL (2001). "Ferrocene—how it all began". Journal of Organometallic Chemistry. 637–639: 3–6. doi:10.1016/S0022-328X(01)01126-3.
^ Water Treatment Chemicals (PDF). Akzo Nobel Base Chemicals. 2007. Archived from the original (PDF) on 13 August 2010. Retrieved 26 Oct 2007.
^ "Phosphorus Treatment and Removal Technologies" (PDF). Minnesota Pollution Control Agency. June 2006.
^ Prathna TC, Srivastava A (2021). "Ferric chloride for odour control: studies from wastewater treatment plants in India". Water Practice and Technology. 16 (1): 35–41. doi:10.2166/wpt.2020.111. S2CID 229396639.
^ Park KH, Mohapatra D, Reddy BR (2006). "A study on the acidified ferric chloride leaching of a complex (Cu–Ni–Co–Fe) matte". Separation and Purification Technology. 51 (3): 332–337. doi:10.1016/j.seppur.2006.02.013.
^ Dueñas Díez M, Fjeld M, Andersen E, et al. (2006). "Validation of a compartmental population balance model of an industrial leaching process: The Silgrain process". Chem. Eng. Sci. 61 (1): 229–245. Bibcode:2006ChEnS..61..229D. doi:10.1016/j.ces.2005.01.047.
^ John David Graham. "Safer Printmaking—Intaglio". University of Saskatchewan. Retrieved 5 February 2024.
^ Harris P, Hartman R, Hartman J (November 1, 2002). "Etching Iron Meteorites". Meteorite Times. Retrieved October 14, 2016.
^ Mike Lockwood, Carl Zambuto. "A message about mirror coating and recoating". Lockwood Custom Optics, Inc. Lockwood Custom Optics. Retrieved 5 February 2024.
^ CoinValueLookup (13 December 2023). "Buffalo Nickel No Date Value: How Much Is It Worth Today?". CoinValueLookup. Retrieved 5 February 2024.
^ Scott D, Schwab R (2019). "3.1.4. Etching". Metallography in Archaeology and Art. Cultural Heritage Science. Springer. doi:10.1007/978-3-030-11265-3. ISBN 978-3-030-11265-3. S2CID 201676001.
^ Dreher EL, Beutel KK, Myers JD, Lübbe T, Krieger S, Pottenger LH (2014). "Chloroethanes and Chloroethylenes". Ullmann's Encyclopedia of Industrial Chemistry. pp. 1–81. doi:10.1002/14356007.o06_o01.pub2. ISBN 9783527306732.
^ "Toxic Substances – 1,2-Dichloroethane". ATSDR. Retrieved 2023-08-30.
^ Riddell WA, Noller CR (1932). "Mixed Catalysis in the Friedel and Crafts Reaction. The Yields in Typical Reactions using Ferric Chloride–Aluminum Chloride Mixtures as Catalysts". J. Am. Chem. Soc. 54 (1): 290–294. doi:10.1021/ja01340a043.
^ Louis F. Fieser (1937). "1,2-Naphthoquinone". Organic Syntheses. 17: 68. doi:10.15227/orgsyn.017.0068.
^ So RC, Carreon-Asok AC (2019). "Molecular Design, Synthetic Strategies, and Applications of Cationic Polythiophenes". Chemical Reviews. 119 (21): 11442–11509. doi:10.1021/acs.chemrev.8b00773. PMID 31580649. S2CID 206542971.
^ Albright H, Davis AJ, Gomez-Lopez JL, Vonesh HL, Quach PK, Lambert TH, Schindler CS (2021). "Carbonyl–Olefin Metathesis". Chemical Reviews. 121 (15): 9359–9406. doi:10.1021/acs.chemrev.0c01096. PMC 9008594. PMID 34133136.
^ White AD (2001). "Iron(III) Chloride-Silica Gel". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.ri059. ISBN 0471936235.
^ White AD (2001). "Iron(III) Chloride-Alumina". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.ri057. ISBN 0471936235.
^ White AD (2001). "Iron(III) Chloride-Sodium Hydride". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.ri060. ISBN 0471936235.
^ Mallory, Sheehan, Hrapchak (1990). "Verhoeff's Elastic Stain". In Carson F, Cappellano CH (eds.). Histotechnology – A Self-Instructional Text. Chicago: ASCP Press. Retrieved 2 January 2013 – via The Visible Mouse Project, U.C. Davis.
^ "Molysite". mindat.org. Mindat. Retrieved 5 February 2024.
^ "IMA list of Minerals". International Mineralogical Association. 21 March 2011. Retrieved 5 February 2024.
^ Oeste FD, de Richter R, Ming T, Caillol S (January 13, 2017). "Climate engineering by mimicking natural dust climate control: the iron salt aerosol method". Earth System Dynamics. 8 (1): 1–54. Bibcode:2017ESD.....8....1O. doi:10.5194/esd-8-1-2017 – via esd.copernicus.org.
^ Krasnopolsky VA, Parshev VA (1981). "Chemical composition of the atmosphere of Venus". Nature. 292 (5824): 610–613. Bibcode:1981Natur.292..610K. doi:10.1038/292610a0. S2CID 4369293.
^ Krasnopolsky VA (2006). "Chemical composition of Venus atmosphere and clouds: Some unsolved problems". Planetary and Space Science. 54 (13–14): 1352–1359. Bibcode:2006P&SS...54.1352K. doi:10.1016/j.pss.2006.04.019.

Iron Trichloride