Ohře River
Etymology
The name is of Celtic or pre-Celtic origin. In the 9th century, it appeared as Agara. According to one theory, its meaning was 'salmon river' (composed of the words ag, eg – 'salmon', and are, ara – 'flowing water'). Another theory suggests that the name was derived from agriā and meant a fast-moving, fast-flowing river. In the 12th century, Ohře was written as Egre, Oegre and Ogre.
Course
The Ohře originates in the territory of Weißenstadt in the Fichtel Mountains at an elevation of 752 m (2,467 ft), below the Schneeberg mountain. It flows to Litoměřice, where it enters the Elbe River at an elevation of 143 m (469 ft).
The Ohře flows through the Fichtel Mountains in an eastward direction, through Lake Weissenstadt (Weißenstädter See) and through the towns of Röslau and Marktleuthen, and, after almost 50 km, reaches the Czech-German border near Hohenberg an der Eger. It then flows through the historic region of the Czech Republic which was known until 1945 as Egerland. The river passes the towns of Cheb, (German: Eger, like the river), Loket, Sokolov, Karlovy Vary, Klášterec nad Ohří, Kadaň, Žatec, Louny, Libochovice, Budyně nad Ohří and Terezín before flowing into the river Elbe at Litoměřice.
The river is 304.6 km (189.3 mi) long, of which 256 km (159 mi) is in the Czech Republic, making it the fourth longest river in the Czech Republic. The German part of the river (including the border section) is 49.8 km (30.9 mi) long.
The highest volume flow rate occurs in spring. The average volume flow rate at the mouth is 37.94 m³/s. The lower part of the river flows through areas with the lowest average precipitation in the Czech Republic (400–500 mm).
Drainage basin
The Ohře's drainage basin has an area of 5,606.1 km (2,164.5 sq mi). The area of the drainage basin in the Czech Republic is 4,601.1 km (1,776.5 sq mi), in Bavaria is 920.4 km (355.4 sq mi). The rest of the drainage basin is in Saxony.
The drainage basin is divided to further third-level basin areas:
Basin code | Basin name | Area (km) |
---|---|---|
1-13-01 | Ohře to the confluence with Teplá | 2,471.0 |
1-13-02 | Teplá and Ohře to the confluence with Liboc | 1,147.1 |
1-13-03 | Liboc and Ohře to the confluence with Chomutovka | 1,262.7 |
1-13-04 | Ohře from Chomutovka to the mouth | 725.3 |
Tributaries
The longest tributaries of the Ohře are:
Tributary | Length (km) | River km | Side |
---|---|---|---|
Wondreb / Odrava | 66.1 | 224.1 | right |
Teplá | 65.1 | 175.3 | right |
Blšanka | 50.8 | 81.3 | right |
Chomutovka | 50.4 | 65.8 | left |
Röslau / Reslava | 46.4 | 252.3 | right |
Liboc | 46.4 | 91.1 | right |
Svatava / Zwota | 41.0 | 203.0 | left |
Rolava | 36.6 | 177.4 | left |
Libocký potok | 31.8 | 219.4 | left |
Bystřice | 29.6 | 153.8 | left |
Plesná / Fleißenbach | 29.1 | 226.6 | left |
Prunéřovský potok | 24.7 | 126.4 | left |
Hasina | 24.4 | 69.8 | right |
Smolnický potok | 23.6 | 47.0 | right |
Libava | 22.7 | 216.9 | right |
Chodovský potok | 22.7 | 178.0 | left |
Slatinný potok | 20.8 | 236.0 | left |
Lobezský potok | 20.0 | 202.7 | right |
Use
The Ohře is primarily used for irrigation and hydroelectric energy. There are two reservoirs: Skalka (built in 1962–1964, area 378 ha (930 acres)) and Nechranice (built 1961–1968, area 1,338 ha (3,310 acres)).
Notes
- ^ The Ohře touches the territory of the Czech Republic for the first time at the 256th river km, and from this moment on its "Czech" part is counted, although in the next 3.7 km the total volume of the flow briefly returns to the territory of Germany several times. From the 252.3 river km (the confluence with the Röslau), the course of the river leaves the Czech-German border and flows only through the Czech Republic.
- ^ Povodí Ohře (state enterprise, whose activity is the care and administration of the river basin) calculated the length of the river to the confluence with the Röslau (i.e. without the section that forms the Czech-German border) at 253.6 km (157.6 mi) and the total length at 302.0 km (187.7 mi).
- ^ Due to the construction of two reservoirs on the river and the straightening of meanders, the calculated length on the river in the Czech Republic by the T. G. Masaryk Water Research Institute is 246.6 km (153.2 mi), however, this length does not correspond to the numbering of river kilometres.
- ^ According to the older measurements, the area was 5,613.7 km (2,167.5 sq mi).
References
- ^ "Historie ovlivněná řekou" (in Czech). Povodí Ohře. Retrieved 2023-09-27.
- ^ Loucká, Pavla (1997-09-05). "Řeky si pojmenovali nejdřív" (in Czech). Vesmír. Retrieved 2023-09-27.
- ^ Blažek, Václav (2010-10-07). "Etymological analysis of toponyms from Ptolemy's Description of Central Europe" (PDF). Ulster University. p. 33. Retrieved 2023-09-27.
- ^ "Návrh plánu dílčího povodí Ohře, dolního Labe a ostatních přítoků labe: III. plánovací období (2021–2027)" (in Czech). Povodí Ohře. pp. 5–8. Retrieved 2023-09-27.
- ^ Labe a jeho povodí (PDF) (in Czech). International Commission for the Protection of the Elbe. 2005. p. 6. Retrieved 2023-09-27.
- ^ "Základní charakteristiky toku Ohře a jeho povodí" (in Czech). T. G. Masaryk Water Research Institute. Retrieved 2023-09-27.
- ^ Complete table of the Bavarian Waterbody Register by the Bavarian State Office for the Environment (xls, 10.3 MB)
- ^ "Analýza oblastí s významným povodňovým rizikem v povodí Ohře a podklady k Plánu pro zvládání povodňových rizik v povodí Labe" (in Czech). Povodí Ohře. 2021. p. 8. Retrieved 2024-01-11.
- ^ "Vodní toky". Evidence hlásných profilů (in Czech). Czech Hydrometeorological Institute. Retrieved 2024-10-22.
- ^ "Vodní dílo Skalka" (in Czech). Povodí Ohře. Retrieved 2023-09-27.
- ^ "Vodní dílo Nechranice" (in Czech). Povodí Ohře. Retrieved 2023-09-27.
External links
- Povodí Ohře – administrator of the river basin in the Czech Republic
- River flow at Louny station – Flood Warning and Forecasting Service of the Czech Hydrometeorological Institute