Widnes-Runcorn Transporter Bridge
History
At the beginning of the 20th century the only means of crossing the river Mersey at Runcorn Gap were by rail on the Runcorn Railway Bridge (which also had a footpath) or by using the ancient ferry (a rowing boat). In the 1890s the Manchester Ship Canal had been constructed and this meant that the journey by ferry had to be made in two stages, with a climb over the wall of the canal between the stages. A road bridge was clearly needed but it would have to pass high enough over the canal to allow the passage of ocean-going ships. The cost of doing this was felt to be prohibitive.
In 1899 the Widnes & Runcorn Bridge Company was established under the chairmanship of Sir John Brunner to investigate the options. Their decision was to build a transporter bridge. This would be cheaper than an orthodox type of bridge and the passage of the transporter car could be timed to allow the passage of the ships. The first transporter bridge in the world had been opened in 1893 in Bilbao, Spain. This had been followed in 1898 by transporter bridges in Rouen (France) and Bizerta (now Tunisia). Parliamentary approval had already been obtained for a transporter bridge over the River Usk at Newport, Monmouthshire. This was then followed by the construction of a transporter bridge in Middlesbrough over the River Tees in 1911.
An Act of Parliament was obtained in 1900 giving approval for the bridge, and the Act also allowed for the formal ending of the ferry. It was designed by John Webster and John Wood. Construction began in December 1901 and was completed in 1905. The cost was £130,000 (equivalent to £17,630,000 in 2023). The transporter bridge was opened (in the absence of King Edward VII who was indisposed) by Sir John Brunner on 29 May 1905.
During the following years there were problems both with the functioning of the bridge and with its financing. The company could not make it pay and in 1911 it was sold to Widnes Corporation. Several improvements were made to the bridge over the years. In its later years it made 49,000 journeys annually, carrying 280,000 cars, 145,000 commercial vehicles and over 2 million passengers. However, it was inadequate for the growing needs of the region and its physical condition was deteriorating. A fixed high-level bridge was needed and this was eventually opened on 21 July 1961. The transporter bridge closed the following day and was later demolished.
Structure
The two towers were 180 feet (55 m) high and the distance between them spanned by a truss was 1,000 feet (300 m). The weight of the cables suspending the girder was 250 tons. The underside of the girder was 82 feet (25 m) above the high water level. The transporter car was 55 feet (17 m) long and 24 feet 6 inches (7.5 m) wide and was designed to carry 4 two-horse farm waggons and 300 passengers. A shelter was provided for the passengers. The bottom of the car was 12 feet (3.7 m) above high water level and it cleared the ship canal wall by 4.5 feet (1.4 m). It was suspended from a moving trolley 77 feet (23 m) long. In conditions of reasonable weather and load the journey took 2.5 minutes. The driver was sited in a cabin on top of the car from which he had an uninterrupted view in all directions. An endless wire rope, pulled by a winch housed in the power house, provided the power to move the trolley across the River Mersey. The winch on the Widnes side pulled the trolley towards Widnes and Runcorn in turn. Approach roads of 320 feet (98 m) on the Widnes side and 470 feet (140 m) on the Runcorn side were built.
Present day
The former approaches to the transporter bridge at the bottom of Waterloo Road, Runcorn, and Mersey Road, Widnes, can still be seen. On the Widnes side the power house remains and it has been designated as a Grade II* listed building by English Heritage. Transporter Building, the former office building, also remains nearby in Mersey Road.
References
- ^ Thompson 2000, p. 27.
- ^ Hirst, Lauren (29 October 2011). "Flashback: Celebrating 50 years of the Runcorn Bridge". Liverpool Echo. Retrieved 21 January 2018.
- ^ Tansley, Janet (17 February 2016). "Amazing pictures of Runcorn's Bridges show how Mersey landmarks were built". liverpoolecho. Retrieved 5 July 2018.
- ^ Thompson 2000, p. 3.
- ^ Thompson 2000, p. 6.
- ^ Thompson 2000, pp. 25–27.
- ^ Starkey 1990, p. 213.
- ^ Thompson 2000, p. 5.
- ^ Thompson 2000, pp. 4, 16.
- ^ UK Retail Price Index inflation figures are based on data from Clark, Gregory (2017). "The Annual RPI and Average Earnings for Britain, 1209 to Present (New Series)". MeasuringWorth. Retrieved 7 May 2024.
- ^ Starkey 1990, pp. 213–214.
- ^ Thompson 2000, p. 22.
- ^ Thompson 2000, pp. 23–24.
- ^ Thompson 2000, p. 36.
- ^ Starkey 1990, pp. 221–222.
- ^ Thompson 2000, pp. 12–15.
- ^ Historic England (2011), "Former transporter bridge power house (Grade II*) (1130419)", National Heritage List for England, retrieved 10 May 2011
- ^ "Halton YMCA join West Bank community". Runcorn and Widnes World. Newsquest (North Wales). 9 July 2008. Retrieved 21 January 2018.
Bibliography
- Starkey, H. F. (1990), Old Runcorn, Halton Borough Council
- Thompson, Dave (2000), Bridging the Years: The Story of Runcorn-Widnes Transporter Bridge, Widnes: Dave Thompson
Further reading
- The Bridging of Runcorn Gap, Halton Borough Council, 1978
- Thompson, Dave (2000), Bridging the Mersey: A Pictorial History, Zaltbommel: European Library