Loading

  • 21 Aug, 2019

  • By, Wikipedia

Dysprosium Compounds
Dysprosium is a chemical element; it has symbol Dy and atomic number 66. It is a rare-earth element in the lanthanide series with a metallic silver luster. Dysprosium is never found in nature as a free element, though, like other lanthanides, it is found in various minerals, such as xenotime. Naturally occurring dysprosium is composed of seven isotopes, the most abundant of which is Dy.

Dysprosium was first identified in 1886 by Paul Émile Lecoq de Boisbaudran, but it was not isolated in pure form until the development of ion-exchange techniques in the 1950s. Dysprosium has relatively few applications where it cannot be replaced by other chemical elements. It is used for its high thermal neutron absorption cross-section in making control rods in nuclear reactors, for its high magnetic susceptibility (χv ≈ 5.44×10) in data-storage applications, and as a component of Terfenol-D (a magnetostrictive material). Soluble dysprosium salts are mildly toxic, while the insoluble salts are considered non-toxic.

Characteristics

Physical properties

Dysprosium sample

Dysprosium is a rare-earth element and has a metallic, bright silver luster. It is quite soft and can be machined without sparking if overheating is avoided. Dysprosium's physical characteristics can be greatly affected by even small amounts of impurities.

Dysprosium and holmium have the highest magnetic strengths of the elements, especially at low temperatures. Dysprosium has a simple ferromagnetic ordering at temperatures below its Curie temperature of 90.5 K (−182.7 °C), at which point it undergoes a first-order phase transition from the orthorhombic crystal structure to hexagonal close-packed (hcp). It then has a helical antiferromagnetic state, in which all of the atomic magnetic moments in a particular basal plane layer are parallel and oriented at a fixed angle to the moments of adjacent layers. This unusual antiferromagnetism transforms into a disordered (paramagnetic) state at 179 K (−94 °C). It transforms from the hcp phase to the body-centered cubic phase at 1,654 K (1,381 °C).

Chemical properties

Dysprosium metal retains its luster in dry air but it will tarnish slowly in moist air, and it burns readily to form dysprosium(III) oxide:

4 Dy + 3 O2 → 2 Dy2O3

Dysprosium is quite electropositive and reacts slowly with cold water (and quickly with hot water) to form dysprosium hydroxide:

2 Dy (s) + 6 H2O (l) → 2 Dy(OH)3 (aq) + 3 H2 (g)

Dysprosium hydroxide decomposes to form DyO(OH) at elevated temperatures, which then decomposes again to dysprosium(III) oxide.

Dysprosium metal vigorously reacts with all the halogens at above 200 °C:

2 Dy (s) + 3 F2 (g) → 2 DyF3 (s) [green]
2 Dy (s) + 3 Cl2 (g) → 2 DyCl3 (s) [white]
2 Dy (s) + 3 Br2 (l) → 2 DyBr3 (s) [white]
2 Dy (s) + 3 I2 (g) → 2 DyI3 (s) [green]

Dysprosium dissolves readily in dilute sulfuric acid to form solutions containing the yellow Dy(III) ions, which exist as a [Dy(OH2)9] complex:

2 Dy (s) + 3 H2SO4 (aq) → 2 Dy (aq) + 3 SO
4 (aq) + 3 H2 (g)

The resulting compound, dysprosium(III) sulfate, is noticeably paramagnetic.

Compounds

Dysprosium sulfate, Dy2(SO4)3
See also: Dysprosium compounds

Dysprosium halides, such as DyF3 and DyBr3, tend to take on a yellow color. Dysprosium oxide, also known as dysprosia, is a white powder that is highly magnetic, more so than iron oxide.

Dysprosium combines with various non-metals at high temperatures to form binary compounds with varying composition and oxidation states +3 and sometimes +2, such as DyN, DyP, DyH2 and DyH3; DyS, DyS2, Dy2S3 and Dy5S7; DyB2, DyB4, DyB6 and DyB12, as well as Dy3C and Dy2C3.

Dysprosium carbonate, Dy2(CO3)3, and dysprosium sulfate, Dy2(SO4)3, result from similar reactions. Most dysprosium compounds are soluble in water, though dysprosium carbonate tetrahydrate (Dy2(CO3)3·4H2O) and dysprosium oxalate decahydrate (Dy2(C2O4)3·10H2O) are both insoluble in water. Two of the most abundant dysprosium carbonates, Dy2(CO3)3·2–3H2O (similar to the mineral tengerite-(Y)), and DyCO3(OH) (similar to minerals kozoite-(La) and kozoite-(Nd)), are known to form via a poorly ordered (amorphous) precursor phase with a formula of Dy2(CO3)3·4H2O. This amorphous precursor consists of highly hydrated spherical nanoparticles of 10–20 nm diameter that are exceptionally stable under dry treatment at ambient and high temperatures.

Dysprosium forms several intermetallics, including the dysprosium stannides.

Isotopes

Main article: Isotopes of dysprosium

Naturally occurring dysprosium is composed of seven isotopes: Dy, Dy, Dy, Dy, Dy, Dy, and Dy. These are all considered stable, although only the last two are theoretically stable: the others can theoretically undergo alpha decay. Of the naturally occurring isotopes, Dy is the most abundant at 28%, followed by Dy at 26%. The least abundant is Dy at 0.06%. Dysprosium is the heaviest element to have isotopes that are predicted to be stable rather than observationally stable isotopes that are predicted to be radioactive.

Twenty-nine radioisotopes have been synthesized, ranging in atomic mass from 138 to 173. The most stable of these is Dy, with a half-life of approximately 3×10 years, followed by Dy with a half-life of 144.4 days. The least stable is Dy, with a half-life of 200 ms. As a general rule, isotopes that are lighter than the stable isotopes tend to decay primarily by β decay, while those that are heavier tend to decay by β decay. However, Dy decays primarily by alpha decay, and Dy and Dy decay primarily by electron capture. Dysprosium also has at least 11 metastable isomers, ranging in atomic mass from 140 to 165. The most stable of these is Dy, which has a half-life of 1.257 minutes. Dy has two metastable isomers, the second of which, Dy, has a half-life of 28 ns.

History

In 1878, erbium ores were found to contain the oxides of holmium and thulium. French chemist Paul Émile Lecoq de Boisbaudran, while working with holmium oxide, separated dysprosium oxide from it in Paris in 1886. His procedure for isolating the dysprosium involved dissolving dysprosium oxide in acid, then adding ammonia to precipitate the hydroxide. He was only able to isolate dysprosium from its oxide after more than 30 attempts at his procedure. On succeeding, he named the element dysprosium from the Greek dysprositos (δυσπρόσιτος), meaning "hard to get". The element was not isolated in relatively pure form until after the development of ion exchange techniques by Frank Spedding at Iowa State University in the early 1950s.

Due to its role in permanent magnets used for wind turbines, it has been argued that dysprosium will be one of the main objects of geopolitical competition in a world running on renewable energy. But this perspective has been criticised for failing to recognise that most wind turbines do not use permanent magnets and for underestimating the power of economic incentives for expanded production.

In 2021, Dy was turned into a 2-dimensional supersolid quantum gas.

Occurrence

Xenotime

While dysprosium is never encountered as a free element, it is found in many minerals, including xenotime, fergusonite, gadolinite, euxenite, polycrase, blomstrandine, monazite and bastnäsite, often with erbium and holmium or other rare earth elements. No dysprosium-dominant mineral (that is, with dysprosium prevailing over other rare earths in the composition) has yet been found.

In the high-yttrium version of these, dysprosium happens to be the most abundant of the heavy lanthanides, comprising up to 7–8% of the concentrate (as compared to about 65% for yttrium). The concentration of Dy in the Earth's crust is about 5.2 mg/kg and in sea water 0.9 ng/L.

Production

Dysprosium is obtained primarily from monazite sand, a mixture of various phosphates. The metal is obtained as a by-product in the commercial extraction of yttrium. In isolating dysprosium, most of the unwanted metals can be removed magnetically or by a flotation process. Dysprosium can then be separated from other rare earth metals by an ion exchange displacement process. The resulting dysprosium ions can then react with either fluorine or chlorine to form dysprosium fluoride, DyF3, or dysprosium chloride, DyCl3. These compounds can be reduced using either calcium or lithium metals in the following reactions:

3 Ca + 2 DyF3 → 2 Dy + 3 CaF2
3 Li + DyCl3 → Dy + 3 LiCl

The components are placed in a tantalum crucible and fired in a helium atmosphere. As the reaction progresses, the resulting halide compounds and molten dysprosium separate due to differences in density. When the mixture cools, the dysprosium can be cut away from the impurities.

About 100 tonnes of dysprosium are produced worldwide each year, with 99% of that total produced in China. Dysprosium prices have climbed nearly twentyfold, from $7 per pound in 2003, to $130 a pound in late 2010. The price increased to $1,400/kg in 2011 but fell to $240 in 2015, largely due to illegal production in China which circumvented government restrictions.

Currently, most dysprosium is being obtained from the ion-adsorption clay ores of southern China. As of November 2018 the Browns Range Project pilot plant, 160 km south east of Halls Creek, Western Australia, is producing 50 tonnes (49 long tons) per annum.

According to the United States Department of Energy, the wide range of its current and projected uses, together with the lack of any immediately suitable replacement, makes dysprosium the single most critical element for emerging clean energy technologies; even their most conservative projections predicted a shortfall of dysprosium before 2015. As of late 2015, there is a nascent rare earth (including dysprosium) extraction industry in Australia.

Applications

Dysprosium is used, in conjunction with vanadium and other elements, in making laser materials and commercial lighting. Because of dysprosium's high thermal-neutron absorption cross-section, dysprosium-oxide–nickel cermets are used in neutron-absorbing control rods in nuclear reactors. Dysprosium–cadmium chalcogenides are sources of infrared radiation, which is useful for studying chemical reactions. Because dysprosium and its compounds are highly susceptible to magnetization, they are employed in various data-storage applications, such as in hard disks. Dysprosium is increasingly in demand for the permanent magnets used in electric-car motors and wind-turbine generators.

Neodymium–iron–boron magnets can have up to 6% of the neodymium substituted by dysprosium to raise the coercivity for demanding applications, such as drive motors for electric vehicles and generators for wind turbines. This substitution would require up to 100 grams of dysprosium per electric car produced. Based on Toyota's projected 2 million units per year, the use of dysprosium in applications such as this would quickly exhaust its available supply. The dysprosium substitution may also be useful in other applications because it improves the corrosion resistance of the magnets.

Dysprosium is one of the components of Terfenol-D, along with iron and terbium. Terfenol-D has the highest room-temperature magnetostriction of any known material, which is employed in transducers, wide-band mechanical resonators, and high-precision liquid-fuel injectors.

Dysprosium is used in dosimeters for measuring ionizing radiation. Crystals of calcium sulfate or calcium fluoride are doped with dysprosium. When these crystals are exposed to radiation, the dysprosium atoms become excited and luminescent. The luminescence can be measured to determine the degree of exposure to which the dosimeter has been subjected.

Nanofibers of dysprosium compounds have high strength and a large surface area. Therefore, they can be used to reinforce other materials and act as a catalyst. Fibers of dysprosium oxide fluoride can be produced by heating an aqueous solution of DyBr3 and NaF to 450 °C at 450 bars for 17 hours. This material is remarkably robust, surviving over 100 hours in various aqueous solutions at temperatures exceeding 400 °C without redissolving or aggregating. Additionally, dysprosium has been used to create a two dimensional supersolid in a laboratory environment. Supersolids are expected to exhibit unusual properties, including superfluidity.

Dysprosium iodide and dysprosium bromide are used in high-intensity metal-halide lamps. These compounds dissociate near the hot center of the lamp, releasing isolated dysprosium atoms. The latter re-emit light in the green and red part of the spectrum, thereby effectively producing bright light.

Several paramagnetic crystal salts of dysprosium (dysprosium gallium garnet, DGG; dysprosium aluminium garnet, DAG; dysprosium iron garnet, DyIG) are used in adiabatic demagnetization refrigerators.

The trivalent dysprosium ion (Dy) has been studied due to its downshifting luminescence properties. Dy-doped yttrium aluminium garnet (Dy:YAG) excited in the ultraviolet region of the electromagnetic spectrum results in the emission of photons of longer wavelength in the visible region. This idea is the basis for a new generation of UV-pumped white light-emitting diodes.

The stable isotopes of dysprosium have been laser cooled and confined in magneto-optical traps for quantum physics experiments. The first Bose and Fermi quantum degenerate gases of an open shell lanthanide were created with dysprosium. Because dysprosium is highly magnetic—indeed it is the most magnetic fermionic element and nearly tied with terbium for most magnetic bosonic atom—such gases serve as the basis for quantum simulation with strongly dipolar atoms.

Due to its strong magnetic properties, Dysprosium alloys are used in the marine industry's sound navigation and ranging (SONAR) system. The inclusion of dysprosium alloys in the design of SONAR transducers and receivers can improve sensitivity and accuracy by providing more stable and efficient magnetic fields.

Precautions

Like many powders, dysprosium powder may present an explosion hazard when mixed with air and when an ignition source is present. Thin foils of the substance can also be ignited by sparks or by static electricity. Dysprosium fires cannot be extinguished with water. It can react with water to produce flammable hydrogen gas. Dysprosium chloride fires can be extinguished with water. Dysprosium fluoride and dysprosium oxide are non-flammable. Dysprosium nitrate, Dy(NO3)3, is a strong oxidizing agent and readily ignites on contact with organic substances.

Soluble dysprosium salts, such as dysprosium chloride and dysprosium nitrate are mildly toxic when ingested. Based on the toxicity of dysprosium chloride to mice, it is estimated that the ingestion of 500 grams or more could be fatal to a human (c.f. lethal dose of 300 grams of common table salt for a 100 kilogram human). The insoluble salts are non-toxic.

References

  1. ^ "Standard Atomic Weights: Dysprosium". CIAAW. 2001.
  2. ^ Prohaska, Thomas; Irrgeher, Johanna; Benefield, Jacqueline; Böhlke, John K.; Chesson, Lesley A.; Coplen, Tyler B.; Ding, Tiping; Dunn, Philip J. H.; Gröning, Manfred; Holden, Norman E.; Meijer, Harro A. J. (2022-05-04). "Standard atomic weights of the elements 2021 (IUPAC Technical Report)". Pure and Applied Chemistry. doi:10.1515/pac-2019-0603. ISSN 1365-3075.
  3. ^ Arblaster, John W. (2018). Selected Values of the Crystallographic Properties of Elements. Materials Park, Ohio: ASM International. ISBN 978-1-62708-155-9.
  4. ^ Yttrium and all lanthanides except Ce and Pm have been observed in the oxidation state 0 in bis(1,3,5-tri-t-butylbenzene) complexes, see Cloke, F. Geoffrey N. (1993). "Zero Oxidation State Compounds of Scandium, Yttrium, and the Lanthanides". Chem. Soc. Rev. 22: 17–24. doi:10.1039/CS9932200017. and Arnold, Polly L.; Petrukhina, Marina A.; Bochenkov, Vladimir E.; Shabatina, Tatyana I.; Zagorskii, Vyacheslav V.; Cloke (2003-12-15). "Arene complexation of Sm, Eu, Tm and Yb atoms: a variable temperature spectroscopic investigation". Journal of Organometallic Chemistry. 688 (1–2): 49–55. doi:10.1016/j.jorganchem.2003.08.028.
  5. ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 28. ISBN 978-0-08-037941-8.
  6. ^ Weast, Robert (1984). CRC, Handbook of Chemistry and Physics. Boca Raton, Florida: Chemical Rubber Company Publishing. pp. E110. ISBN 0-8493-0464-4.
  7. ^ Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S.; Audi, G. (2021). "The NUBASE2020 evaluation of nuclear properties" (PDF). Chinese Physics C. 45 (3): 030001. doi:10.1088/1674-1137/abddae.
  8. ^ Chiera, Nadine Mariel; Dressler, Rugard; Sprung, Peter; Talip, Zeynep; Schumann, Dorothea (2022-05-28). "High precision half-life measurement of the extinct radio-lanthanide Dysprosium-154". Scientific Reports. 12 (1). Springer Science and Business Media LLC. doi:10.1038/s41598-022-12684-6. ISSN 2045-2322.
  9. ^ Lide, David R., ed. (2007–2008). "Dysprosium". CRC Handbook of Chemistry and Physics. Vol. 4. New York: CRC Press. p. 11. ISBN 978-0-8493-0488-0.
  10. ^ Emsley, John (2001). Nature's Building Blocks. Oxford: Oxford University Press. pp. 129–132. ISBN 978-0-19-850341-5.
  11. ^ Krebs, Robert E. (1998). "Dysprosium". The History and Use of our Earth's Chemical Elements. Greenwood Press. pp. 234–235. ISBN 978-0-313-30123-0.
  12. ^ Jackson, Mike (2000). "Wherefore Gadolinium? Magnetism of the Rare Earths" (PDF). IRM Quarterly. 10 (3): 6. Archived from the original (PDF) on 2017-07-12. Retrieved 2009-05-03.
  13. ^ Junyang Jin, Yaru Ni, Wenjuan Huang, Chunhua Lu, Zhongzi Xu (March 2013). "Controlled synthesis and characterization of large-scale, uniform sheet-shaped dysprosium hydroxide nanosquares by hydrothermal method". Journal of Alloys and Compounds. 553: 333–337. doi:10.1016/j.jallcom.2012.11.068. ISSN 0925-8388. Retrieved 2018-06-13.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  14. ^ "Chemical reactions of Dysprosium". Webelements. Retrieved 2012-08-16.
  15. ^ Patnaik, Pradyot (2003). Handbook of Inorganic Chemical Compounds. McGraw-Hill. pp. 289–290. ISBN 978-0-07-049439-8. Retrieved 2009-06-06.
  16. ^ Heiserman, David L. (1992). Exploring Chemical Elements and their Compounds. TAB Books. pp. 236–238. ISBN 978-0-8306-3018-9.
  17. ^ Perry, D. L. (1995). Handbook of Inorganic Compounds. CRC Press. pp. 152–154. ISBN 978-0-8493-8671-8.
  18. ^ Jantsch, G.; Ohl, A. (1911). "Zur Kenntnis der Verbindungen des Dysprosiums". Berichte der Deutschen Chemischen Gesellschaft. 44 (2): 1274–1280. doi:10.1002/cber.19110440215.
  19. ^ Vallina, B., Rodriguez-Blanco, J.D., Brown, A.P., Blanco, J.A. and Benning, L.G. (2013). "Amorphous dysprosium carbonate: characterization, stability and crystallization pathways". Journal of Nanoparticle Research. 15 (2): 1438. Bibcode:2013JNR....15.1438V. CiteSeerX 10.1.1.705.3019. doi:10.1007/s11051-013-1438-3. S2CID 95924050.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  20. ^ Okamoto, H. (2005-04-01). "Dy-Sn (Dysprosium-Tin)". Journal of Phase Equilibria & Diffusion. 26 (2): 200–202. doi:10.1361/15477030523247.
  21. ^ Audi, G.; Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S. (2017). "The NUBASE2016 evaluation of nuclear properties" (PDF). Chinese Physics C. 41 (3): 030001. Bibcode:2017ChPhC..41c0001A. doi:10.1088/1674-1137/41/3/030001.
  22. ^ DeKosky, Robert K. (1973). "Spectroscopy and the Elements in the Late Nineteenth Century: The Work of Sir William Crookes". The British Journal for the History of Science. 6 (4): 400–423. doi:10.1017/S0007087400012553. JSTOR 4025503. S2CID 146534210.
  23. ^ de Boisbaudran, Paul Émile Lecoq (1886). "L'holmine (ou terre X de M Soret) contient au moins deux radicaux métallique (Holminia contains at least two metal)". Comptes Rendus (in French). 143: 1003–1006.
  24. ^ Weeks, Mary Elvira (1956). The discovery of the elements (6th ed.). Easton, PA: Journal of Chemical Education.
  25. ^ Overland, Indra (2019-03-01). "The geopolitics of renewable energy: Debunking four emerging myths". Energy Research & Social Science. 49: 36–40. Bibcode:2019ERSS...49...36O. doi:10.1016/j.erss.2018.10.018. hdl:11250/2579292. ISSN 2214-6296.
  26. ^ Klinger, Julie Michelle (2017). Rare earth frontiers : from terrestrial subsoils to lunar landscapes. Ithaca, NY: Cornell University Press. ISBN 978-1501714603. JSTOR 10.7591/j.ctt1w0dd6d.
  27. ^ Norcia, Matthew A.; Politi, Claudia; Klaus, Lauritz; Poli, Elena; Sohmen, Maximilian; Mark, Manfred J.; Bisset, Russell N.; Santos, Luis; Ferlaino, Francesca (August 2021). "Two-dimensional supersolidity in a dipolar quantum gas". Nature. 596 (7872): 357–361. arXiv:2102.05555. Bibcode:2021Natur.596..357N. doi:10.1038/s41586-021-03725-7. ISSN 1476-4687. PMID 34408330. S2CID 231861397.
  28. ^ Hudson Institute of Mineralogy (1993–2018). "Mindat.org". www.mindat.org. Retrieved 14 January 2018.
  29. ^ Naumov, A. V. (2008). "Review of the World Market of Rare-Earth Metals". Russian Journal of Non-Ferrous Metals. 49 (1): 14–22. doi:10.1007/s11981-008-1004-6. S2CID 135730387.
  30. ^ Gupta, C. K.; Krishnamurthy N. (2005). Extractive Metallurgy of Rare Earths. CRC Press. ISBN 978-0-415-33340-5.
  31. ^ "Dysprosium (Dy) - Chemical properties, Health and Environmental effects". Lenntech Water treatment & air purification Holding B.V. 2008. Retrieved 2009-06-02.
  32. ^ Bradsher, Keith (December 29, 2010). "In China, Illegal Rare Earth Mines Face Crackdown". The New York Times.
  33. ^ Rare Earths archive. United States Geological Survey. January 2016
  34. ^ Bradsher, Keith (December 25, 2009). "Earth-Friendly Elements, Mined Destructively". The New York Times.
  35. ^ Major, Tom (30 November 2018). "Rare earth mineral discovery set to make Australia a major player in electric vehicle supply chain". ABC News. Australian Broadcasting Corporation. Retrieved 30 November 2018.
  36. ^ Brann, Matt (November 27, 2011). "Halls Creek turning into a hub for rare earths".
  37. ^ New Scientist, 18 June 2011, p. 40
  38. ^ Jasper, Clint (2015-09-22) Staring down a multitude of challenges, these Australian rare earth miners are confident they can break into the market. abc.net.au
  39. ^ Amit, Sinha; Sharma, Beant Prakash (2005). "Development of Dysprosium Titanate Based Ceramics". Journal of the American Ceramic Society. 88 (4): 1064–1066. doi:10.1111/j.1551-2916.2005.00211.x.
  40. ^ Lagowski, J. J., ed. (2004). Chemistry Foundations and Applications. Vol. 2. Thomson Gale. pp. 267–268. ISBN 978-0-02-865724-0.
  41. ^ Bourzac, Katherine (19 April 2011). "The Rare Earth Crisis". MIT Technology Review. Retrieved 18 June 2016.
  42. ^ Shi, Fang, X.; Shi, Y.; Jiles, D. C. (1998). "Modeling of magnetic properties of heat treated Dy-doped NdFeB particles bonded in isotropic and anisotropic arrangements". IEEE Transactions on Magnetics (Submitted manuscript). 34 (4): 1291–1293. Bibcode:1998ITM....34.1291F. doi:10.1109/20.706525.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  43. ^ Campbell, Peter (February 2008). "Supply and Demand, Part 2". Princeton Electro-Technology, Inc. Archived from the original on June 4, 2008. Retrieved 2008-11-09.
  44. ^ Yu, L. Q.; Wen, Y.; Yan, M. (2004). "Effects of Dy and Nb on the magnetic properties and corrosion resistance of sintered NdFeB". Journal of Magnetism and Magnetic Materials. 283 (2–3): 353–356. Bibcode:2004JMMM..283..353Y. doi:10.1016/j.jmmm.2004.06.006.
  45. ^ "What is Terfenol-D?". ETREMA Products, Inc. 2003. Archived from the original on 2015-05-10. Retrieved 2008-11-06.
  46. ^ Kellogg, Rick; Flatau, Alison (May 2004). "Wide Band Tunable Mechanical Resonator Employing the ΔE Effect of Terfenol-D". Journal of Intelligent Material Systems & Structures. 15 (5): 355–368. doi:10.1177/1045389X04040649. S2CID 110609960.
  47. ^ Leavitt, Wendy (February 2000). "Take Terfenol-D and call me". Fleet Owner. 95 (2): 97. Retrieved 2008-11-06.
  48. ^ Loewen, Eric. "Dysprosium: Properties and Applications". Standford Advanced Materials. Retrieved Sep 15, 2024.
  49. ^ "Supercritical Water Oxidation/Synthesis". Pacific Northwest National Laboratory. Archived from the original on 2008-04-20. Retrieved 2009-06-06.
  50. ^ "Rare Earth Oxide Fluoride: Ceramic Nano-particles via a Hydrothermal Method". Pacific Northwest National Laboratory. Archived from the original on 2010-05-27. Retrieved 2009-06-06.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
  51. ^ Hoffman, M. M.; Young, J. S.; Fulton, J. L. (2000). "Unusual dysprosium ceramic nano-fiber growth in a supercritical aqueous solution". J. Mater. Sci. 35 (16): 4177. Bibcode:2000JMatS..35.4177H. doi:10.1023/A:1004875413406. S2CID 55710942.
  52. ^ "Physicists give weird new phase of matter an extra dimension". Live Science. 18 August 2021. Retrieved 18 August 2021.
  53. ^ Gray, Theodore (2009). The Elements. Black Dog and Leventhal Publishers. pp. 152–153. ISBN 978-1-57912-814-2.
  54. ^ Milward, Steve et al. (2004). "Design, Manufacture and Test of an Adiabatic Demagnetization Refrigerator Magnet for use in Space". Archived 2013-10-04 at the Wayback Machine. University College London.
  55. ^ Hepburn, Ian. "Adiabatic Demagnetization Refrigerator: A Practical Point of View". Archived 2013-10-04 at the Wayback Machine. Cryogenic Physics Group, Mullard Space Science Laboratory, University College London.
  56. ^ Carreira, J. F. C. (2017). "YAG:Dy – Based single white light emitting phosphor produced by solution combustion synthesis". Journal of Luminescence. 183: 251–258. Bibcode:2017JLum..183..251C. doi:10.1016/j.jlumin.2016.11.017.
  57. ^ Lu, M.; Youn, S.-H.; Lev, B. (2010). "Trapping Ultracold Dysprosium: A Highly Magnetic Gas for Dipolar Physics". Physical Review Letters. 104 (6): 063001. arXiv:0912.0050. Bibcode:2010PhRvL.104f3001L. doi:10.1103/physrevlett.104.063001. PMID 20366817. S2CID 7614035.
  58. ^ Lu, M.; Burdick, N.; Youn, S.-H.; Lev, B. (2011). "Strongly Dipolar Bose–Einstein Condensate of Dysprosium". Physical Review Letters. 107 (19): 190401. arXiv:1108.5993. Bibcode:2011PhRvL.107s0401L. doi:10.1103/physrevlett.107.190401. PMID 22181585. S2CID 21945255.
  59. ^ Lu, M.; Burdick, N.; Lev, B. (2012). "Quantum Degenerate Dipolar Fermi Gas". Physical Review Letters. 108 (21): 215301. arXiv:1202.4444. Bibcode:2012PhRvL.108u5301L. doi:10.1103/physrevlett.108.215301. PMID 23003275. S2CID 15650840.
  60. ^ Martin, W C; Zalubas, R; Hagan, L (January 1978). "Atomic energy levels - the rare earth elements". OSTI.GOV. OSTI 6507735. Retrieved 2023-03-11.
  61. ^ Chomaz, L.; Ferrier-Barbut, I.; Ferlaino, F.; Laburthe-Tolra, B.; Lev, B.; Pfau, T. (2022). "Dipolar physics: a review of experiments with magnetic quantum gases". Rep. Prog. Phys. 86 (2): 026401. arXiv:2201.02672. doi:10.1088/1361-6633/aca814. PMID 36583342. S2CID 245837061.
  62. ^ Lowen, Eric. "What Are the Lanthanide Series?". Stanford Advanced Materials. Retrieved Aug 2, 2024.
  63. ^ United States. Congress. Senate. Committee on Appropriations (1998). Department of Defense Appropriation Bill, 1999 (Report). U.S. Government Publishing Office. p. 111. Retrieved Aug 2, 2024.
  64. ^ Charles Sherman, John Butler (2007). "Chapter 2 - Electroacoustic Transduction". Transducers and Arrays for Underwater Sound. Springer New York. p. 46. ISBN 9780387331393.
  65. ^ Dierks, Steve (January 2003). "Dysprosium". Material Safety Data Sheets. Electronic Space Products International. Archived from the original on 2015-09-22. Retrieved 2008-10-20.
  66. ^ Dierks, Steve (January 1995). "Dysprosium Chloride". Material Safety Data Sheets. Electronic Space Products International. Archived from the original on 2015-09-22. Retrieved 2008-11-07.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
  67. ^ Dierks, Steve (December 1995). "Dysprosium Fluoride". Material Safety Data Sheets. Electronic Space Products International. Archived from the original on 2015-09-22. Retrieved 2008-11-07.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
  68. ^ Dierks, Steve (November 1988). "Dysprosium Oxide". Material Safety Data Sheets. Electronic Space Products International. Archived from the original on 2015-09-22. Retrieved 2008-11-07.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
Wikimedia Commons has media related to Dysprosium.
Look up dysprosium in Wiktionary, the free dictionary.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Dysprosium&oldid=1245833333#Compounds"