Loading

  • 21 Aug, 2019

  • By, Wikipedia

Template:NFPA 704 Diamond
This template produces a NFPA 704 safety square with optionally four hazard codes. It is designed to be used in a table.

Primary use is through {{Chembox}}, the {{NFPA 704}} box and {{OrganicBox complete}} (chemical data pages).

When used stand-alone (outside of a table), consider the {{NFPA 704}} box.

Parameters

{{NFPA 704 diamond
 | H          =
 | F          =
 | I          =
 | S          =
 | ref        =
 | showimage  =
 | background =
}}

 
Health code, 0-4 or - (hyphen for blank)
Flammability code
Instability (reactivity) code ("R=" is also allowed)
Special code W, OX, W+OX, ..., or - (hyphen for blank)
References. Add the <ref> ... </ref> tags.
Set =no to show text instead ('RA' only. Default: =yes, show image)
background color (e.g., =yellow or =#ff7623)
}}

Input options

Main rule: if the quarter must be blank, input is the hyphen, -. Do not depend on default behavior in this situation.

Basic 0–4 and - (hyphen)

for |H=, |F=, |I=
=0 =1 =2 =3 =4 =- (hyphen)
NFPA 704 four-colored diamondHealth 0: Exposure under fire conditions would offer no hazard beyond that of ordinary combustible material. E.g. sodium chlorideFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
0
0
0
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
1
1
1
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
2
2
2
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g. hydrogen peroxideSpecial hazards (white): no code
3
3
3
NFPA 704 four-colored diamondHealth 4: Very short exposure could cause death or major residual injury. E.g. VX gasFlammability 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneInstability 4: Readily capable of detonation or explosive decomposition at normal temperatures and pressures. E.g. nitroglycerinSpecial hazards (white): no code
4
4
4
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazards (white): no code
Parameters |H=, |F=, |I= accept codes 0, 1, 2, 3, 4, -. Code - (hyphen) produces a blank ("no hazard code").

A blank can be set (enforced) by entering =-, a hyphen. This is the preferred way to reflect what the source states (don't depend on the default blank in this situation).

Default code (blank)

= <blank>
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazards (white): no code

All four codes default to blank, that is: no NFPA code is present or shown. There is no specific text (just a link to the NFPA color section). Note that a blank is not the same as code "0". Code "0" is an explicit statement, while a blank is the absence of any statement.

A blank can also be enforced by entering =- (hyphen). This is the preferred way to reflect what the source states (do not depend on default).

From the input, spaces and even newlines (all whitespace) are treated as blank. Note that =&nbsp; code produces an error, but entering the nbsp character (>= <) is accepted as a space (blank).

Special hazard options

|S=W |S=OX |S=W+OX |S=SA |S=- (hyphen)
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard W: Reacts with water in an unusual or dangerous manner. E.g. sodium, sulfuric acid
W
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard OX: Oxidizer. E.g. potassium perchlorate
OX
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard W+OX: Reacts with water in an unusual or dangerous manner AND is oxidizer
W
OX
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard SA: Simple asphyxiant gas. E.g. nitrogen, helium
SA
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazards (white): no code
|S=ACID |S=ALK |S=COR |S=CRYO |S=POI
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard ACID: Acid
ACID
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard ALK: Alkaline
ALK
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard COR: Corrosive; strong acid or base. E.g. sulfuric acid, potassium hydroxide
COR
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard CRYO: Cryogenic
CRYO
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard POI: Poisonous
POI
|S=RA
|showimage=<default> 		|S=RA
|showimage=yes 		|S=RA
|showimage=no
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard RA: Radioactive. E.g. plutonium
Special hazard RA: Radioactive. E.g. plutonium
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard RA: Radioactive. E.g. plutonium
Special hazard RA: Radioactive. E.g. plutonium
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard RA: Radioactive. E.g. plutonium
RA
|S=BIO
|showimage=<default> 		|S=BIO
|showimage=yes 		|S=BIO
|showimage=no
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard BIO: Biohazardous. E.g. smallpox virus
Special hazard BIO: Biohazardous. E.g. smallpox virus
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard BIO: Biohazardous. E.g. smallpox virus
Special hazard BIO: Biohazardous. E.g. smallpox virus
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard BIO: Biohazardous. E.g. smallpox virus
BIO

For W enter |S=W.

For W OX enter |S=W+OX, |S=W OX or |S=WOX.

The "Special" quarter is sometimes called "Other".

Unknown codes (error)

The diamond template checks for unknown codes.

=abc =&nbsp; =abc
|cat=no
NFPA 704 four-colored diamond

H=abc NFPA code error.
F=klm NFPA code error.
I=pqr NFPA code error.
S=XYZ NFPA code error.
NFPA 704 four-colored diamond

H=  NFPA code error.
F=  NFPA code error.
I=  NFPA code error.
S=&NBSP; NFPA code error.
NFPA 704 four-colored diamond

Articles with unknown codes are listed for maintenance (correction) in Category:Articles with unknown NFPA 704 code (0). Other pages (like this documentation) are not categorized, but have a message instead. This categorizing can be switched off by setting |cat=no

Note that =&nbsp; code produces an error, but entering the nbsp character (= ) is accepted as a space (blank).

Adding references

References can be added using |ref=.

|ref=<ref>{{cite web|url=http://chemlabs.uoregon.edu/Safety/NFPA_White.html|title=More on white codes}}</ref>
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
2
2
2

The <ref> ... </ref> tags should be added. Multiple references can be entered. Depending on cell width, the links show above or next to the diamond. While technically possible to enter plain text, this is not supported (and this could be disallowed in the future).

NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazards (white): no code
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard RA: Radioactive. E.g. plutonium
RA
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard OX: Oxidizer. E.g. potassium perchlorate
OX
NFPA 704 four-colored diamondHealth (blue): no hazard codeFlammability (red): no hazard codeInstability (yellow): no hazard codeSpecial hazard OX: Oxidizer. E.g. potassium perchlorate
OX
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
2
2
2
NFPA 704 four-colored diamondHealth 0: Exposure under fire conditions would offer no hazard beyond that of ordinary combustible material. E.g. sodium chlorideFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
0
0
0
[9]
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
1
1
1
"some title".
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
2
2
2
NFPA 704 four-colored diamondHealth 4: Very short exposure could cause death or major residual injury. E.g. VX gasFlammability 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneInstability 4: Readily capable of detonation or explosive decomposition at normal temperatures and pressures. E.g. nitroglycerinSpecial hazards (white): no code
4
4
4

List of codes

Code descriptions (
)
input type quarter code text
 
code H 0 Health 0: Exposure under fire conditions would offer no hazard beyond that of ordinary combustible material. E.g. sodium chloride
code H 1 Health 1: Exposure would cause irritation but only minor residual injury. E.g. turpentine
code H 2 Health 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroform
code H 3 Health 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gas
code H 4 Health 4: Very short exposure could cause death or major residual injury. E.g. VX gas
code F 0 Flammability 0: Will not burn. E.g. water
code F 1 Flammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oil
code F 2 Flammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuel
code F 3 Flammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasoline
code F 4 Flammability 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propane
code I 0 Instability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogen
code I 1 Instability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calcium
code I 2 Instability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorus
code I 3 Instability 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g. hydrogen peroxide
code I 4 Instability 4: Readily capable of detonation or explosive decomposition at normal temperatures and pressures. E.g. nitroglycerin
code S OX Special hazard OX: Oxidizer. E.g. potassium perchlorate
code S W, W, <s>W</s> Special hazard W: Reacts with water in an unusual or dangerous manner. E.g. sodium, sulfuric acid
code S W+OX, WOX Special hazard W+OX: Reacts with water in an unusual or dangerous manner AND is oxidizer
code S ACID Special hazard ACID: Acid
code S ALK Special hazard ALK: Alkaline
code S BIO Special hazard BIO: Biohazardous. E.g. smallpox virus
code S COR Special hazard COR: Corrosive; strong acid or base. E.g. sulfuric acid, potassium hydroxide
code S CRYO Special hazard CRYO: Cryogenic
code S POI Special hazard POI: Poisonous
code S RA Special hazard RA: Radioactive. E.g. plutonium
hyphen H - Health (blue): no hazard code
hyphen F - Flammability (red): no hazard code
hyphen I - Instability (yellow): no hazard code
hyphen S - Special hazards (white): no code
blank H <blank> Health (blue): no hazard code
blank F <blank> Flammability (red): no hazard code
blank I <blank> Instability (yellow): no hazard code
blank S <blank> Special hazards (white): no code
no letter
no letter 3
no letter 9
no letter WOX
unknown H xyz
unknown F xyz
unknown I xyz
unknown S xyz

Color style

Option |background=green. Default is transparent.
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
2
2
2

Colors used

Blue Red Yellow White
1 4 3 SA
#6691ff #ff6666 #fcff66 #ffffff

Better not to use RGB colors named blue, red, yellow, because these produce a bad contrast with the text.


Template data

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:NFPA 704 diamond in articles based on its TemplateData.

TemplateData for NFPA 704 diamond

No description.

Template parameters[Edit template data]

ParameterDescriptionTypeStatus
Health (blue)H

no description

Suggested values
0, 1, 2, 3, 4, -
Stringoptional
Flammability (red)F

no description

Suggested values
0, 1, 2, 3, 4, -
Stringoptional
Instability, Reactivity (yellow)I R

no description

Suggested values
0, 1, 2, 3, 4, -
Stringoptional
Special code (white)S

no description

Suggested values
OX, W, WOX, W+OX, ACID, ALK, BIO, COR, CRYO, RA
Stringoptional
backgroundbackground

no description

Unknownoptional
refref

no description

Unknownoptional
showimageshowimage

shows S image when available

Booleanoptional
catcat

no description

Unknownoptional


Known issues

  • Is there an ENGVAR-like switch needed, eg for the order of °C - °F temperatures? (Currently, °C is first)
  • For documentation, could use a diamond with the four letters in the quadrants.
  • The non-standard S (on white) codes should be complete, and maybe listed for attention.

Tracking category

See also

References

These references will appear in the article, but this list appears only on this page.
  1. ^ "some title".
  2. ^ [1]
  3. ^ [2]
  4. ^ [3]
  5. ^ "some title".
  6. ^ [4]
  7. ^ [5]
  8. ^ "some title".
  9. ^ [6]
  10. ^ "some title".
  11. ^ [7]
  12. ^ [8]
  13. ^ "some title".
The references are from the demos in this documentation.
The above documentation is transcluded from Template:NFPA 704 diamond/doc. (edit | history)
Editors can experiment in this template's sandbox (edit | diff) and testcases (edit) pages.
Add categories to the /doc subpage. Subpages of this template.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Template:NFPA_704_diamond&oldid=1246603109"